Endmill Series
WNC-Cut Endmills
A special carbide alloy in ultra-fine particles is combined with Toyo Drill's unique cutting edge shapes to make a more rigid and abrasion-resistant end mill, resulting in stable cutting and long tool life. Stocks of these end mills are available in 0.01mm increments to meet the diverse needs of our customers.
WNC Square 2-flute Endmills
∅0.1-∅20(stock by 0.01mm from ∅0.1 to ∅12)
WNC Square 3-flute Endmills
∅2.0-∅12
WNC Square 4-flute Endmills
∅3.0-∅20
WNCB Ball 2-flute Endmills
R0.5-R6
PCD KIRARI Endmills
PCD KIRARI 1-flute Endmills
∅0.5-∅2.5(by 0.1mm)
- Strictry selected PCD.
- The body made of carbide alloy make it possible stable cutting.
- Our unique shape make it possible to high precision, long life, and high efficiency.
- Our endmill offers 20 times longer lifer than a super hard coated endmill for cutting light alloys and FC.
PCD KIRARI 1-flute Ball Endmills
R0.25-R1.25(by R0.05)
- Strictry selected PCD.
- The body made of carbide alloy make it possible stable cutting.
- Our unique shape make it possible to high precision, long life, and high efficiency.
- Our endmill offers 20 times longer lifer than a super hard coated endmill for cutting light alloy and FC.
PCD KIRARI 2-flute Endmills
∅3-∅12(by 1mm)
- Strictry selected PCD.
- A higher level of precision cutting (external diameter cutting precision: 8μm, shank diameter precision: -3μm to -8μm)
- High precision, long life, and high efficiency.
- Our unique shape and large size make it possible to regrind our tools 10 times, or more.
- Our end mill offers 20 times longer lifer than a super hard coated end mill for cutting light alloys and FC.
PCD KIRARI 2-flute Ball Endmills
R1.5-R6(by R0.5)
- Strictry selected PCD.
- A higher level of precision cutting (radius precision: 6μm, shank diameter precision: -3μm to -8μm)
- Thanks to a long shank, it can perform everything from normal processing to deep grooving.
- Our unique shape and large size make it possible to regrind our tools 10 times, or more.
- Our end mill offers 20 times longer lifer than a super hard coated end mill for cutting light alloys and FC.
Direct Action Endmills
Toyo Drill's Direct Action end mills realizes high-speed rotation and high feed rate, thanks to its proprietary blade shapes which resulted after concerted R&D activities. The end mill is made of a carbide alloy where ultra-fine particles are compounded, to achieve a substantial improvement in the toughness and transverse rupture strength, Toyo Drill's Direct Action end mills are god at high-rigid, abrasion-resistant, chattering-resistant, and chipping-resistant machining with high accuracy and high efficiency.
DA Square 2-flute Endmills
∅0.1-∅20
DA Square 4-flute Endmills
∅3-∅20
DAB Ball Endmills
R0.1-R10
DABL Long Ball Endmills
R0.5-R10
DAT Taper Endmills
∅0.3-∅3
DATB Taper Ball Endmills
R0.25-R1.5
Hi-Power Direct Action Endmills (complicated multi-layer high coating)
Hi-power coat (complicated multi-layer high coating) is applied to Direct Action endmills to make a substantial improvement in heat-resistance. There high efficiency endmills with long durability realize high accuracy and high cutting speed machining of medium- andhigh-hardness workmaterials (up to HRC55).
HP Square 2-flute Endmills
∅0.5-∅20
HP Square 4-flute Endmills
∅3-∅20
HPB Ball Endmills
R0.25-R10
HPBL Long Ball Endmills
R0.5-R10
HPT Taper Endmills
∅0.3-∅3
HPTB Taper Ball Endmills
R0.25-R1.5
HPRE Endmills for Deep-Rib Processing
∅0.3-∅3
HPRB Ball Endmills for Deep-Rib Processing
R0.25-R1.5
Endmills for High-Hardness
Toyo Drill's end mills for high-hardness were developed exclusively for cutting high-hardness workpieces (up to HRC70). High-rigidity is used in the design of the cutting edge and body, and the HG coating (a complex multiple-layered coating) maintains a low abrasion coefficient, resulting in high-speed cutting and high efficiency machining.
HGE Endmills for High-Hardness Workmaterials
∅1.0-∅20
HGB Ball Endmills for High-Hardness Workmaterials
R0.5-R10
MNC Cut Endmills (for NC lathes and NC automatic lathes)
Toyo Drill's compact MNC cut endmills are designed for NC lathes and NC automatic lathes in a limited space for machining. Toyo Drill offers two types of MNC cut endmills for machining aluminum, brass, stainless, specialty steels, and other workmaterials.
2-flute
4-flute
Diameter tolerance ∅3-∅12
HPMNC Cut Endmills (for NC lathes and NC automatic lathes)(complicated multiple layered coating)
Hi-power coat (complicated multiple layered coating) is applied to MNC cut endmills for excellent heat-resistance, resulting in less cutting resistance and high-speed rotation and high feed rate.
2-flute
4-flute
Diameter tolerance ∅3-∅12